新冠肺炎应急临床试验设计中的统计学考虑

新型冠状病毒肺炎的突然来袭，国内各地相继启动重大突发公共卫生事件一级响应。为了探索新冠肺炎的治疗，百余项临床研究陆续在国内开展。在突发公共卫生事件下，尽早找到有效的药物和治疗方案对于疾病的控制更加重要，这也对在这种应急情况下所开展临床试验的时效性提出要求，尤其是针对新冠肺炎的注册临床试验。本文从统计学角度，对应急临床试验中临床终点的选择和试验设计中的相关问题进行探讨。     

一种新型高杆灯灯盘挂接装置模型的设计与实验研究

高杆灯是由钢制柱型灯杆和大功率组合式灯架构成的新型照明装置。文中对高杆灯顶部灯盘的挂接进行研究,设计了一套挂接和脱卸方便,电极对接可靠的灯盘挂接装置模型,以指导实际产品的设计制作。通过改变挂接方式与挂接装置结构,借助SolidWorks软件进行三维模型结构设计,加工装配得到挂接装置实物模型。整套机构模型利用单片机控制,引导灯盘挂接顺利完成。     

β-B-BiW9O33夹心型铋（III）钨酸盐的合成、结构及光谱性质

用常规法合成了一种新的一维链状结构的夹心型多酸Na10{[(Cu(H2O)3)2(WO2)2(BiW9O33)2]}·23.5H2O(1),并对其进行X射线单晶结构分析、元素分析、红外光谱和紫外光谱表征。结果显示,该多酸阴离子属于单斜晶系, P2(1)/n空间群,晶胞参数a=1.2865(26) nm, b=2.52563(49) nm, c=1.62185(41) nm,β=94.03(4)°, V=5.20836(1093) nm3, Z=2, R1=0.0539,ωR2=0.1189, Dc=3.36 g/cm3。紫外光谱在236和293 nm有两个多酸特征的吸收峰。     

The relationship between crystallization and break temperature of mould flux

ABSTRACT

Many researchers believe that crystallization is responsible for drastic viscosity changes near the break temperature of mould flux; however, there are no reasonable experimental data to support this view. In this study, the complete crystallization process is recorded in situ by inhibiting the volatilization of fluoride, and the relationship between viscosity change and crystallization near the break temperature is studied. Mould flux with a basicity of 0.65 had no break temperature, and no crystallization occurs within the temperature range of the viscosity test. The other three mould fluxes begin to crystallize before the break temperature, but the crystal volume fractions at the break temperature are different. The break temperature of mould flux is the crystallization temperature with a critical crystal volume fraction, which is related to the viscosity before the break temperature. The higher the viscosity, the smaller the critical crystal volume fraction. Therefore, break temperature?≤?initial crystallization temperature.     

The effect of the exposed crystal plane on the antioxidant activity of nanoceria

Previous reports have noted that exposed crystal planes could affect the antioxidant activity of nanocerias, although the synthesized nanocerias used in those studies had different exposed crystal planes, as well as different sizes and morphologies. In order to better understand the effect of the crystal planes on the antioxidant activity of the materials, two types of nanocerias with similar morphology and size distribution but different crystal planes were synthesized using the hydrothermal method (CeO₂–H) and the ultrasonic template method (CeO₂–U). The antioxidant activities of the nanocerias were further explored within different ·OH concentrations in the reaction system. The experimental results showed that there is an obvious difference in the antioxidant activity of the two types of nanocerias in the lower free radical concentration system due to the effects of exposed crystal planes. CeO₂–U, with more active crystal planes (100), had stronger antioxidant activity. However, with the increase in the ·OH concentration in the reaction system, the difference in the antioxidant activity of the two nanocerias decreased. This research will increase our understanding of the antioxidant activity of the exposed crystal planes on nanocerias.     

Single-Crystalline TiO2(B) Nanobelts with Unusual Large Exposed {100} Facets and Enhanced Li-Storage Capacity

The {100} facet of single-crystalline TiO₂(B) is an ideal platform for inserting Li ions, but it is hard to be obtained due to its high surface energy. Here, the single-crystalline TiO₂(B) nanobelts from H₂Ti₃O₇ with nearly 70% {100} facets exposed are synthesized, which significantly enhances Li-storage capacity. The first-principle calculations demonstrate an ab in-plane 2D diffusion through the exposed {100} facets. As a consequence, the nanobelts can significantly accommodate Li ions in LiTiO₂ formula with specific capacity up to 335 mAh g⁻¹, which is in good agreement with the electrochemical characterizations. Coating with conductive and protective poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), the cut-off discharge voltage is as low as 0.5 V, leading to a capacity of 160.7 mAh g⁻¹ after 1500 cycles with a retention rate of 66% at 1C. This work provides a practical strategy to increase the Li-ion capacity and cycle stability by tailoring the crystal orientation and nanostructures.     

基于改进卷积神经网络的单幅图像超分辨率重建方法

对于重建图像存在的边缘失真和纹理细节信息模糊的问题，提出一种基于改进卷积神经网络（CNN）的图像超分辨率重建方法。首先在底层特征提取层以三种插值方法和五种锐化方法进行多种预处理操作，并将只进行一次插值操作的图像和先进行一次插值后进行一次锐化的图像合并排列成三维矩阵；然后在非线性映射层将预处理后构成的三维特征映射作为深层残差网络的多通道输入，以获取更深层次的纹理细节信息；最后在重建层为减少图像重建时间在网络结构中引入亚像素卷积来完成图像重建操作。在多个常用数据集上的实验结果表明，与经典方法相比，所提方法重建图像的纹理细节信息和高频信息能得到更好的恢复，峰值信噪比（PSNR）平均增加0.23 dB，结构相似性（SSIM）平均增加0.0066。在保证图像重建时间的前提下，所提方法更好地保持重建图像的纹理细节并减少图像边缘失真，提升重建图像的性能。     

往复式活塞压缩机中间喷液制冷系统的(火用)分析

通过对往复式活塞压缩机进行改造，在单级活塞压缩系统的基础上搭建了一种中间喷液冷却的准两级压缩系统并在蒸发温度为-20 ℃的工况下进行实验测量，根据实验数据对单级活塞压缩系统和新型中间喷液冷却活塞压缩系统的COP、〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失和〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗效率进行计算。结果表明：加入中间喷液冷却系统后，系统的COP由1.27提升至1.36，单位制冷量由155.1 kJ/kg提升至176.7 kJ/kg；单级活塞压缩系统〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失较大的部分是压缩机和膨胀阀，分别占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的16.2%和14.8%，加入中间喷液冷却系统后压缩机部分的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失明显降低，仅占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的3.6%，冷凝器及膨胀阀的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损比也有所下降。     

Effect of strontium substitution on the structure and dielectric properties of unfilled tungsten bronze Ba4-xSrxSmFe0.5Nb9.5O30 ceramics

The effects of Sr²⁺ substitution for Ba²⁺ on phase structure, microstructure, dielectric and electric properties for Ba_4-xSr_xSmFe_0.5Nb_9.5O₃₀ (x = 0, 1, 2, 3 and 4) ceramics were systematically researched. X-ray diffraction patterns show that Ba_4-xSr_xSmFe_0.5Nb_9.5O₃₀ (x = 0, 1, 2 and 3) ceramics are tetragonal tungsten bronze compound with a space group of P4bm, while the sample for x = 4 is an orthorhombic structure compound. The result can be corroborated by the analysis of Raman spectroscopy. As the Sr²⁺ contents increase from 0 to 3, the full width at half maximum of Raman lines of all samples increase gradually, indicating that the degree of lattice distortion increase. All tetragonal tungsten bronze ceramics exhibited a broad permittivity peaks, accompanied by frequency dispersion, indicating all samples are relaxor. The electrical properties of BSSFN ceramics were further studied by complex impedance spectroscopy. XPS spectrum shows that Fe²⁺ and Fe³⁺ coexist in Ba_4-xSr_xSmFe_0.5Nb_9.5O₃₀ ceramics, and their proportion varies with the concentration of Sr²⁺.     

生物质纤维和改性木质素对聚乳酸结晶性能的影响

采用改性木质素(MZS)作为成核剂,生物质纤维(BF)作为增强剂,通过双螺杆挤出机制备了生物降解的聚乳酸(PLA)/BF/MZS材料。采用差式扫量热仪(DSC)、电子万能试验机和扫描电子显微镜(SEM)分析了BF和MZS对PLA材料性能的影响。结果表明,BF和MZS有效提高了PLA的结晶能力和力学性能。当BF和MZS的含量分别为15%和1%时,PLA材料结晶度提高至67.1%,在50℃/min降温速率下仍具有较高的结晶能力。105℃等温结晶时,15%BF和1%MZS的PLA材料半结晶时间降低至9.0 s,比纯PLA缩短了72.2%。当PLA含有3%BF和1%MZS时,拉伸强度和冲击强度分别为70.1 MPa和7.4 kJ/m^2,比纯PLA分别提高了7.8%和10.4%,根据SEM显示,当BF含量为3%时,在PLA材料中分布较均匀。